Samsung RFG298AARS Manuel D’Utilisation
Setting up your French Door Refrigerator
GEttinG READy to instALL tHE REFRiGERAtoR
Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art
features and efficiencies that this new appliance offers.
features and efficiencies that this new appliance offers.
Selecting the best location for the Refrigerator
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with level (or nearly level) flooring.
• A location with enough space for the Refrigerator doors to
open easily.
• Allow sufficient space for air circulation of the internal
cooling system.
If the Refrigerator does not have enough space, the internal
cooling system may not work properly.
• A location without direct exposure to sunlight.
• A location with level (or nearly level) flooring.
• A location with enough space for the Refrigerator doors to
open easily.
• Allow sufficient space for air circulation of the internal
cooling system.
If the Refrigerator does not have enough space, the internal
cooling system may not work properly.
8_
Setting Up
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung
French Door Refrigerator.
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung
French Door Refrigerator.
Model
Depth
“A”
width
“B”
Height
“C”
overall
Height “D”
Depth
“E”
RFG298AA
33”
(83.8cm)
35-3/4”
(90.8cm)
68-1/2 ”
(174.4cm)
69-3/4”
(177.3cm)
35-5/8 ”
(90.5cm)
FLooRinG
For proper installation, this refrigerator must be placed on a level
For proper installation, this refrigerator must be placed on a level
surface of hard material that is the same height as the rest of the
flooring. This surface should be strong enough to support a fully
loaded refrigerator, or approximately 328lbs (150kg). To protect the
finish of the flooring, cut a large section of the cardboard carton and
place under the refrigerator where you are working. When moving
the refrigerator, be sure to pull it straight out and push back in
straight.
• Allow clearance to the right, left, back and top when installing. This will help reduce power
consumption and keep your energy bills lower.
• Do not install the Refrigerator where the temperature will go below 50ºF (10ºC).
• Do not locate the refrigerator where the wet condition.
• Do not locate the refrigerator where the wet condition.
CAUTION
When moving your refrigerator
To prevent floor damage be sure the front adjusting
legs are in the up position(above the floor).
Refer to ‘Adjusting the doors’ in the manual
(on page 15).
To prevent floor damage be sure the front adjusting
legs are in the up position(above the floor).
Refer to ‘Adjusting the doors’ in the manual
(on page 15).
Control Lever
Flat-blade screw driver(-)
B
A
C
E
D
B
A
C
E
D