Samsung RFG297AC Manuel D’Utilisation

 

Setting Up

4.   Remove the filter cap and insert the filter into the filter 

housing.

5.    Slowly turn the water filter 90º clockwise to align with the 

printing mark on the cover, locking the filter in position. 

Make sure to align the water filter label mark with center of 

cover filter printing as illustrated. Remember, do not over-

tighten.

You should remove the right side upper glass shelf before installing the water filter.

Removing any residual matter inside the water supply line 
after installing the water filter.

1.   Turn ON the main water supply & turn OFF the valve to the water supply 

line.

2.   Run water through the dispenser until the water runs clear
      (approx. 6-7minutes). This will clean the water supply system and remove 

air from the lines.

3.  Additional flushing may be required in some households.
4.   Open the Refrigerator door and make sure there are no water leaks coming 

from the water filter.

Be sure to flush the dispenser thoroughly or water may from it. 

This is due to the fact that there is still air in the line.

Setting up your French Door Refrigerator

Turn until the label  

is aligned.

Separation

of red cap.

Cover filter.