Samsung RL34SG Manuel D’Utilisation

Do not use inflammable aerosols such as spray paint and 
dope near the freezer/refrigerator. Otherwise, there will be 
A risk of explosion.

Do not let children hang on the doors or climb the refrige-
rator to avoid damaging the refrigerator and injuring the 
Children.

Do not store corrosive, inflammable and explosive, strong 
acid or alkali substances such as butane, ether, vitriol, 
benzene, and alcohol. Bottles containing liquid foods also 
shall not be stored in the freezer; otherwise the bottles may 
Be broken. 

If the appliance is disconnected from the power supply, you 
should wait for at least five minutes before reconnecting the 
power to avoid damaging the compressor.

                   : If the flexible power cord is damaged, it must be 
                     repaired by special tools. Thus, it must be replaced 
                     by the repair store appointed by the manufacturer. 

If the refrigerator can not work normally or is damaged, do 
not continue using it. Pull out the power plug and contact the 
local service center immediately. If the power cord is 
damaged, to avoid any accident, it must be replaced by 
Service agent of the manufacturer or a qualified staff.

Do not splash water on the top or back of the refrigerator to 
avoid reducing the insulation effects of the appliance.

If you wish to dispose of the freezer/refrigerator, please first 
remove the door seals.
When the appliance is disposed of, it shall be handled by 
professional staff instead of being discarded casually; 
otherwise it may cause hazards or other dangers to the 
Environment.

CAUTION

Simply Type:

1. Take down HIGNE UPP and SHAFT-HINGE and install them at the opposite side of the 
    HING-UPP. Take down COVER DOOR UPP and fridge door.

2. Take down SCREW A, SCREW E and MID HINGE, and then the refrigerator door. Take down     
    CAP HINGE HOLE, CAP SCREW CABI and SCREW F. Then fix them at right.

3. Gently incline the appliance in less than 45 degree, remove the right side FOOT, and unfasten 
    the SCREW D. Take down HINGE LOW, FIXER HINGE LOW ,

 and 

    STOPPER HINGE LOW. Reverse and fix STOPPER HINGE LOW with FIXER HINGE LOW to 
    the left of HINGE LOW and 

.

4. Take down left FOOT and unfasten SCREW D. Take down and fix REINF to the right. Then install  
    FOOT.

5. Take down SCREW G and STOPPER DOOR in the fridge and freezer doors and install them at 
    the left of the doors. Take down CAP HOLE DOOR and CAP SPACER DOOR and fix them at 
    the left of the doors,

6. Fix MID HINGE with SCREW A and SCREW E, and install the freezer door. Fix left HINGE-
    LOW and install FOOT. Put the refrigerator stable and install the fridge and freezer doors. Fix 
    HINGE UPP with SCREW A.

SHIFT HINGE

SHIFT HINGE