Samsung RS2578SH Manuel D’Utilisation

27

STICKER

(MONTH INDICATION)

COVER FILTER

(A)

ALIGN THE INDICATION MARK
WITH LOCK POSITION.

Please check that the indication line aligns with the lock position.

Install the water filter.

1) Slip the compression nut through the provid-

ed  plastic tubing.

2) Tighten the compression nut onto 1/4”

comprression fitting.

Connect the water line to the refrigerator.

Water line must be connected to drinkable water only.
Cut off 1/4 inch of the provided plastic tubing squarely to prevent leaks when reconnect.

Do not overtighten the compression nut.

1) As shown, the fixed cap separates from the refrigerator by rotating

it counterclockwise.

Remove the water filter from the box and put a month indicator 

sticker on the filter as shown.

2) If the water filter was installed in March, put on the "SEP" sticker.

3) Remove the protective cap then position and insert the 

filter as shown.

4) Slowly turn the water filter clockwise 90º to align 

the indication mark on the cover, locking the filter in posi

tion. Do not overtighten.

Keep the cap(A) in a safe place for recapping, when you will
not use the filter.

● Using Copper Tubing

- Slip the compression nut and ferrule on cop-

per tubing as shown.

● Using Plastic Tubing

- Insert the molded end of the plastic tubing

into the compression fitting.

3) Tighten the compression nut onto the compres-

sion fitting.

4) Turn water on and check for any leakage.

Compression Nut (1/4

″)

(Provided)

Compression Fitting
(Provided)

Compression Nut (1/4

″)

(Purchased)

Plastic Tubing
(Purchased)

Copper Tubing
(Purchased)

Ferrule

(Purchased)

Household Water Line

Refrigerator

SEPARATION 
OF RED CAP

DA68-00500Y(0.8)  2006.5.3 9:20 PM  페이지27