Samsung RL58* Manuel D’Utilisation

Safety information 

 

(R600a), a natural gas with high environmental 
compatibility that is, however, also combustible. 
When transporting and installing the appliance,
care should be taken to ensure that no parts of 
the refrigerating circuit are damaged.

SEvERE WARNING SIGNS 
FOR INSTAllATION

• Do not install this appliance in a humid, oily

or dusty location, in a location exposed to 
direct sunlight and water (rain drops).

-   Deteriorated insulation of electrical parts may 

cause an electric shock or fire.

• Do not place this refrigerator in direct sunlight or

expose to the heat from stoves, room heaters or 
other appliances.

• Do not plug several appliances into the same

multiple power board. 
The refrigerator should always be plugged into 
its own individual electrical outlet which has a 
voltage rating that matched the rating plate.

-   This provides the best performance and also 

prevents overloading house wiring circuits, 
which could cause a fire hazard from overheated 
wires. If the wall socket is loose, do not insert
the power plug.

-   There is a risk of electric shock or fire.
• Do not use a cord that shows cracks or

abrasion damage along its length or at either 
end.

• Do not bend the power cord excessively or

place heavy articles on it.

• Do not use aerosols near the refrigerator.
-   Aerosols used near the refrigerator may cause 

an explosion or fire.

• Do not install this appliance in a location where

gas may leak.

-  This may result in an electric shock or fire.

• The installation or any service of this

appliance is recommended by a qualified

  technician or service company.
-   Failing to do so may result in an electric shock, 

fire, explosion, problems with the product, or 
injury.

• This refrigerator must be properly installed and

located in accordance with the manual before it 
is used.

• Connect the power plug in proper position with

the cord hanging down.

-   If you connect the power plug upside down, wire

can get cut off and a cause fire or an electric 
shock.

• Make sure that the power plug is not squashed

  or damaged by the back of the refrigerator.
• When moving the refrigerator, be careful not to

roll over or damage the power cord.

-  This constitutes a fire hazard.
• The appliance must be positioned so that the

plug is accessible after installation.

• The refrigerator must be grounded.
   -  You must ground the refrigerator to

-   prevent any power leakages or electric shocks 

caused by current leakage from the refrigerator.

• Never use gas pipes, telephone lines or other

potential lightening rods as ground.

-   Improper use of the ground plug can result in an

electric shock.

• If the power cord is damaged, have it

replaced immediately by the manufacturer 
or its service agent.

• The fuse on the refrigerator must be changed by

a qualified technician or service company.

-    Failing to do so may result in an electric shock 

or personal injury.

cAuTION SIGNS FOR 
INSTAllATION

•  Keep ventilation opening in the appliance 

enclosure or mounting structure clear of 
obstruction.

• Allow the appliance to stand for 2 hours after

installation.

SEvERE WARNING SIGNS 
FOR uSING

• Do not insert the power plug with wet hands.
• Do not store articles on the top of the

appliance.

-   When you open or close the door, the articles

may fall and cause a personal injury and/or 
material damage.

• Do not put items filled with water on the

refrigerator.

-   If spilled, there is a risk of fire or electric shock.
• Do not let children hang on the door.
-    Failure to do so may cause serious personal 

injury.

• Do not leave the doors of the refrigerator open

while the refrigerator is unattended and do not 
let children enter inside the refrigerator. 

• Do not allow babies or children go inside the

drawer.

-   It can cause death from suffocation by

WARNING

cAuTION

WARNING