Samsung RM255BABB Manuel D’Utilisation

1) Button Touch Sound (Refer to Sounds Table)

1-1) When touching each button on the control panel, an input confirmation sound is generated (see the following

table), according to each operating condition.

1-2) If several plural buttons are pressed simultaneously or in case of wrong button operation, an  input confirmation

sound is not generated.

2) DOOR-OPEN Alarm Sound

2-1) If F compartment, R compartment, Arctic Zone, or Fresh Zone door remains open for 2 minutes in row, alarm

sound is generated by 10 times.

2-2) If the door open condition is maintained even longer, the operation recycles generating the alarm sound 10 times

per 1 minute period.

2-3) The alarm sound stops readily if the refrigerator compartment and the freezer compartment are both closed.

1) Display Function at PANEL 

MAIN MICOM Communication Error

1-1) If 10 seconds elapse without response, after transmission of a communication request from the PANEL MICOM,

the PANEL PCB repeats ON/OFF until the communication error is cleared (by repeting ALL ON for 0. 5 second
and ALL OFF for 0. 5 second).

2) Display Function at MAIN  

LOAD MICOM Communication Error

2-1) If 10 seconds elapse without response, after transmission of a communication request from the MAIN MICOM to

the LOAD [SUB(ORDINATE)] MICOM, then the PANEL PCB DISPLAY repeats ON/OFF until the communication
error is cleared (by repeting ALL ON for 0. 5 second and ALL OFF for 0. 5 second).

Description

SUB ON 

(Function Selection)

When selecting power freezing / power refrigeration /
lock / stop icing / Filter Reset / light
When canceling power freezing / power refrigeration
/ lock / stop icing / light

When selecting the refrigerator compartment / freezer
compartment
When water supply is finished, in the ice maker test mode
Door-open alarm sound

Ding Dong Sound

ALERT(Warning Sound)

When selecting the cube ice / crushed ice
When selecting the Arctic Select Zone function
When selecting the Fresh Select Zone function

SUB OFF 

(Function Cancellation)

VERTICAL

(Temperature Setting)

MODE

(Function

Change "Ding")

Sound Group

Sound Pattern

Existing Ding Dong Sound

26

26