Samsung RM255BASB Manuel D’Utilisation
DISASSEMBLY AND REASSEMBLY
The ice dispenser is located in the upper portion
of freezer. This assembly is to store and
dispense ice made by the icemaker.
1. Lift the ice bucket up
of freezer. This assembly is to store and
dispense ice made by the icemaker.
1. Lift the ice bucket up
and slide out the ice
dispenser assembly .
The Ice Maker is located inside of the Ice
Dispenser assembly
1. Remove Ice Maker Support screw(2),and pull
Dispenser assembly
1. Remove Ice Maker Support screw(2),and pull
it out.
2. Disconnect the ice maker wire connector
3. Push the Locking Tab(1), and pull(2)the Ice
3. Push the Locking Tab(1), and pull(2)the Ice
Maker Kit
In order to assemble the Icemaker Kit.
1. Align the Geard Motor Shaft with Ice Tray hole
1. Align the Geard Motor Shaft with Ice Tray hole
to assemble.
2. Slide the IceMaker Kit like the arrow(1)
3. Connect the ice maker wire connector.
4. Align the tab holes with tabs(2) located in the
3. Connect the ice maker wire connector.
4. Align the tab holes with tabs(2) located in the
top of liner, and slide the ice maker inward.
5. Tighten the screws (2) of the ice maker
support.
The freezer light is located in the bottom of auger
motor case. The light is covered with an opaque
cover.
1. Remove the light cover by pressing the cover.
motor case. The light is covered with an opaque
cover.
1. Remove the light cover by pressing the cover.
Freezer Light
Ice Dispenser
Ice Maker
52
Front hook
50
50