Samsung RSH3N Manuel D’Utilisation

Page de 44
operating the SAMSUNG  
side-by-side refrigerator
sEtting uP tHE rEfrigErator
Now that you have your new refrigerator installed and in place, you are ready to set up and enjoy the full 
features and functions of the appliance.
By completing the following steps, your refrigerator should be fully operational. If not, first check the power 
supply and electricity source or try the troubleshooting section at the back of this user guide. If you have any 
further questions, contact your Samsung Electronics service center.
1.  Place the refrigerator in an appropriate location with reasonable clearance between the wall 
and the refrigerator. Refer to installation instructions in this manual.
2.  Once the refrigerator is plugged in, make sure the interior light comes on when you open the 
doors.
3.  Set the temperature control to the coldest temperature and wait for an hour.
    The freezer should get slightly chilled and the motor should run smoothly.
4.  After powering the refrigerator, it will take a few hours to reach the appropriate temperature.
     Once the refrigerator temperature is sufficiently cool, you can store food and drink in the 
refrigerator.
02 
o
PE
rating
operating
 
_
DA99-01584A(HM-P)-EN(0.1).indd   23
2007.10.4   5:20:44 PM