Samsung RSH3K Manuel D’Utilisation

 

setting up

3.   After adjusting the doors, turn the nut 

 clockwise 

 until it reaches the lower end of the 

bolt, then tighten the bolt again with the wrench 

 to fix the nut in place 

If you do not secure the nut firmly, the bolt may release.

CHECKing tHE watEr DisPEnsEr LinE (oPtionaL)

A water dispenser is just one of the helpful features on your new Samsung refrigerator. To help promote better 
health, the Samsung water filter removes unwanted particles from your water. However, it does not sterilize 
or destroy microorganisms. You will need to purchase a water purifying system to do that. In order for the 
icemaker to operate properly, water pressure of 138 ~862 Kpa is required. Under normal conditions, a 170 cc 
paper cup can be filled in 10 seconds. If the refrigerator is installed in an area with low water pressure (below 
138 Kpa), you can install a booster pump to compensate for the low pressure. Make sure the water storage 
tank inside the refrigerator is properly filled. To do this, press the water dispenser lever until the water runs from 
the water outlet.  

Water Line installation Kits are included with unit. You can find it in freezer drawer.

instaLLing tHE watEr DisPEnsEr LinE

For Interior model
Parts for water line Installation

Connecting to the water supply line

1. first, shut off the main water supply line.
2. locate the nearest cold, drinking water line.
3. follow the Water line Installation Instructions in the 
    installation kit.

The water line must be connected

to the cold water pipe. If it is connected 

to the hot water pipe, it may cause the

purifier to malfunction.

4.  After connecting the water supply to the water filter, turn your main water supply back on and 

dispense about 1l to clear and prime the water filter.

DA99-01584A(HM-P)-EN(0.1).indd   18

2007.10.4   5:20:36 PM