Samsung 65612 Manuel D’Utilisation

If the refrigerator is too large to pass through your  

doorway easily, you can remove the refrigerator doors.
1. After removing the screw, and carefully lift up the upper 

right hinge cover.

Right Hinge Cover

2. Disconnect the reed switch connector from the hinge 

cover and remove the hinge cover. Disconnect the hous-

ing connector from the electric wire harness in the top of 

the refrigerator door. The third wire does not connect to 

anything.

3. Remove the screw that holds the ground wire.

Ground Wire

4. With the 13/32-in. (10-mm) wrench, remove the three 

bolts that hold the hinge on the top of the refrigerator.

5. Separate the hinge from the electric wire harness and  

the ground wire.

6. Remove the refrigerator door by lifting it upward.

Be careful not to drop the refrigerator door during 

removal. Scratches or door damage could occur.

Hinge Cover

Reed Switch Connector

Housing Connector

Unused Wire

DA99-01921A (EN-1).indd   11

2010.3.16   1:7:23 PM