Samsung 65603 Manuel D’Utilisation

1. Remove the refrigerator and freezer doors as described 

on pages 11 and 12.

2. Remove two screws and front leg cover from the  

bottom of the refrigerator.

3. Remove the cap from the back side of the leg cover 

and insert it into the opening on the opposite rear side.

4. Remove four bolts and the left and right bottom hinge 

assemblies from the bottom of the refrigerator.

5. Unscrew the leg from the right bottom hinge. Using a 

5/32-in. (4-mm) hex wrench, separate the hinge shaft 

from the right hinge bracket.

6. Turn the right bracket over and reinstall the hinge shaft 

in the bracket. Tighten the hinge shaft with the 5/32-in. 

(4-mm) hex wrench. Thread the leg back into the op-

posite side of the hinge bracket.

7. Reinstall the two bottom hinges on the bottom of the 

refrigerator and secure with the four bolts. 

 

NOTE: These hinges should be installed opposite from 

where they were removed. 

8. Remove screw and door stopper from the right-bottom 

side of the freezer door, flip it, and reinstall it on the  

left-bottom side of the freezer door.

Cap

Cap

DA99-01921A (EN-1).indd   13

2010.3.16   1:7:27 PM