Samsung DA68-01890Q Manuel D’Utilisation

Page de 68
4_
 
safety information 
     SEVERE WARNING SIGNS FOR INSTALLATION
•  Do not install the refrigerator in a damp place or place where it may come in contact  
with water.
   - Deteriorated insulation of electrical parts may cause an electric shock or fire.
•  Do not install this appliance in a humid, oily or dusty location, in a location exposed to 
direct sunlight and water (rain drops).
•  Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room 
heaters or other appliance.
•  Do not plug several appliances into the same multiple power board. The refrigerator 
should always be plugged into its own individual electrical board which has a voltage 
rating that matched the rating plate.
   -  This provides the best performance and also prevents overloading house wiring circuits, 
which could cause a fire hazard from overheated wires.
• If the wall socket is loose, do not insert the power plug.
   -  There is a risk of electric shock or fire.
•  Do not use a cord that shows cracks or abrasion damage along its length or at either end.
• Do not bend the power cord excessively or place heavy articles on it.
•  Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and 
pull straight out from the outlet.
   -  Damage to the cord may cause short-circuit, fire and/or electric shock.
• Do not use aerosols near the refrigerator.
   -  Aerosols used near the refrigerator may cause an explosion or fire.
•  The water supply to this refrigerator must only be installed/connected by a suitably 
qualified person and connect to a potable water supply only.
•  In order to operate the ice maker properly, water pressure of 20~125 psi is required.
WARNING
safety  information                                                 
     
• The Refrigerator must be safely grounded
   -  Always make sure that you have grounded the Refrigerator before attempting to investigate 
or repair any part of the appliance. Power leakages can cause severe electric shock.
•  This refrigerator must be properly installed and located in accordance with the manual 
before it is used.
• Connect the power plug in proper position with the cord hanging down.
   -  If you connect the power plug upside down, the wire can get cut off and cause a fire or 
electric shock.
•  When moving the refrigerator, be careful not to roll over or damage the power cord.
   -  This constitutes a fire hazard.
•  Make sure that the power plug is not squashed or damaged by the back of the refrigerator.
• Keep the packing materials out of reach of children.
   -  There is a risk of death from suffocation if children put them on their head.
•  The appliance must be positioned so that the plug is accessible after installation.
•  You need to remove all the protective plastic film before you initially plug in to use the 
product.