Samsung RA19F/RA19V Manuel D’Utilisation

Selecting the location for appliance.
• Install the appliance

SURSHUO\RQWKHÁDWDQG
ÀUPVXUIDFH

- Stand table option 

model can not be 
adjustable for the height 
of appliance.

Install appliance in the available space.
•  Allow 1 foot (30cm) 

from the ceiling, and 
2 inches (5 cm) from 
the wall.

Install appliance in the appropriate location.
• Place the appliance 

away from direct 
sunlight or heat.

Do not install appliance in a damp place.
•  There is a risk of 

electric shock or 
malfunctions.

6SHFLÀFDWLRQRIHOHFWULFSRZHU
‡7KHHOHFWULFSRZHUVSHFLÀFDWLRQ

of the appliance is 
attached inside at the top 
of the door or outside at 
the back.

Do not use any extension cords or double 
adaptors.
•  Do not plug several

appliances into the same 
multiple power board.
This could cause over
KHDWLQJDQGWKHULVNRIÀUH

Earthing the appliance.
• If the socket is the 

2-legged type, the 
appliance must be earthed.

• Do not connect the earthing

wire to the gas pipes or telephone lines. 

Replacing the lamp.

1. Unplug the power cord from the socket.
2. Remove  Tray partition and shelf.
3. Unscrew by plus-type driver then take 

out lamp cover.(optional model only)

4. Turn the lamp counter clockwise.
5HSODFHZLWKQHZODPSVDPHVSHFLÀFDWLRQ

as original one. 

Clean up inside of the refrigerator with a 
clean cloth.

Insert the power plug into the socket while 
keeping the door open for checking the 
interior light, then turn the temperature 
control button to “MAX”.

Close the door and let the refrigerator 
operate for 2-3 hours.

Check the refrigerator temperature by 
touching inside the freezer.

The appropriate temperature should 
be controlled by turing the temperature 
control button to “4”, or the desired 
temperature can be adjustable. Now your 
refrigerator is ready to work.

Warning ! : Disconnect power supply before 

replacing the lamp.

about 5cm

about 5cm

about 30cm