Kelvinator KCBM48F Manuel D’Utilisation
PROHIBTION
Do not attempt to remove or repair any
component unless instructed by factory.
Make sure that the unit is not resting on or
against the electrical cord and the plug.
Do not store any flammable and explosive gas
or liquids inside the unit.
Do not attempt to alter or tamper with the
electrical cord.
INSTALLATION
IMPORTANT!!! PLEASE READ BEFORE
INSTALLATION
INSTALLATION
The refrigeration system operates most
efficiently when installed in an area with cool,
dry air circulation.
dry air circulation.
There must be at least 6 inches of clearance on
both sides and the back of the cabinet.
Select a location away from the heat and
moisture generating equipment such as stoves,
ovens, etc.
ovens, etc.
Avoid direct sun rays.
Make sure all accessories are installed (i.e
Make sure all accessories are installed (i.e
shelves, shelf clips, casters) before plugging the
unit in.
unit in.
Please read through the manual in its entirety.
CABINET LOCATION GUIDELINES
Install the unit on strong and leveled surfaces
• Unit may make unpleasant noises if surface
is uneven
• Unit may malfunction if surface is uneven
Install the unit in an indoor, well‐ventilated
area
• Unit performs more efficiently in a well‐
• Unit performs more efficiently in a well‐
ventilated area
• For best performance, please maintain
clearance of 4” on the back of the unit.
• Outdoor use may cause decreased
efficiency and damage to the unit.
Avoid installation in a high humidity and/or
dusty area
• Humidity could cause unit to rust and
• Humidity could cause unit to rust and
decrease efficiency of the unit
• Dust collected on the condenser coil will
cause unit to malfunction. Clean the
condenser at least once a month with a
brush or a clean cloth.
condenser at least once a month with a
brush or a clean cloth.
Select a location away from heat and
moisture‐generating equipment
• High ambient temperatures will cause the
• High ambient temperatures will cause the
compressor to overwork, leading to higher
energy bills and gradual breakdown of the
unit
energy bills and gradual breakdown of the
unit
ELECTRICAL
Please ensure that the required voltage of the
compressor is being supplied at all times. Low or
high voltage can detrimentally affect the
refrigeration unit. All units should be plugged into a
grounded and properly sized electrical outlet with
appropriate overcurrent protection. Please refer to
compressor is being supplied at all times. Low or
high voltage can detrimentally affect the
refrigeration unit. All units should be plugged into a
grounded and properly sized electrical outlet with
appropriate overcurrent protection. Please refer to
3