JAI CV-A11 Manuel D’Utilisation
CV-A11
1. General
The CV-A11 is a monochrome progressive scan 1/3” CCD cameras, designed for automated
inspection application, featuring an extremely small housing and a wide range of unique
functions.
The asynchronous trigger can be set to work in several modes, to allow functions such as pulse
inspection application, featuring an extremely small housing and a wide range of unique
functions.
The asynchronous trigger can be set to work in several modes, to allow functions such as pulse
width controlled shutter, programmable shutter speed and long time integration.
All mode settings of the camera can be set up via an RS-232C interface, greatly reducing the
need for mechanical switches of jumpers.
The CV-A11 outputs an analogue video signal, with composite sync.
The latest version of this manual can be downloaded from:
All mode settings of the camera can be set up via an RS-232C interface, greatly reducing the
need for mechanical switches of jumpers.
The CV-A11 outputs an analogue video signal, with composite sync.
The latest version of this manual can be downloaded from:
The latest version of Camera Control Tool for CV-A11 can be downloaded from:
2. Standard Composition
The standard camera composition consists of the camera main body.
3. Main Features
• New compact size 1/3” monochrome CCD camera
• 648 (h) x 492 (v) pixels for VGA
• Progressive scan
• Single channel video output
• High S/N ratio > 56dB
• Extended range of functions and options compared with CV-M10
• Shutter speeds from 1/30 to 1/100 000 in 15 steps
• Programmable exposure
• Partial scanning 1/2, 1/3 and 1/6 for higher frame rates
• Internal, external HD/VD or random synchronization
• Edge pre-select, pulse width and start/stop trigger modes
• Long time exposure with external VD pulse
• Frame-delay readout mode in connection with pulse width controlled shutter
• Exposure enable EEN, write enable WEN and pixel clock out
• Short ASCII commands for modes setting via serial port
• Windows 98/NT/ME/2000 setup software
• 648 (h) x 492 (v) pixels for VGA
• Progressive scan
• Single channel video output
• High S/N ratio > 56dB
• Extended range of functions and options compared with CV-M10
• Shutter speeds from 1/30 to 1/100 000 in 15 steps
• Programmable exposure
• Partial scanning 1/2, 1/3 and 1/6 for higher frame rates
• Internal, external HD/VD or random synchronization
• Edge pre-select, pulse width and start/stop trigger modes
• Long time exposure with external VD pulse
• Frame-delay readout mode in connection with pulse width controlled shutter
• Exposure enable EEN, write enable WEN and pixel clock out
• Short ASCII commands for modes setting via serial port
• Windows 98/NT/ME/2000 setup software
- 2 -