Tektronix TVS600 & TVS600A Series Manuel D’Utilisation
FORMat Subsystem
TVS600 & TVS600A Command Reference
2–99
FORMat:TRACe:REF
FORMat:TRACe:REF?
FORMat:TRACe:REF?
TVS600A Models Only
This command sets/queries the type of encoding used to transfer a Reference
trace through word serial and RS232 external interfaces.
trace through word serial and RS232 external interfaces.
The number of significant digits returned by an ASCII data query is not
selectable. A setting of ASCii, 0 selects a format with a varying number of
significant digits depending on the value of the data point. Refer to the TVS600
& TVS600A Series Waveform Analyzers User Manual for a definition of the data
formats for <type>.
selectable. A setting of ASCii, 0 selects a format with a varying number of
significant digits depending on the value of the data point. Refer to the TVS600
& TVS600A Series Waveform Analyzers User Manual for a definition of the data
formats for <type>.
This command has no effect on FDC data transfers which are always REAL,32.
FORMat[:DATA]:TRACe:REF <type>[,<length>]
FORMat[:DATA]:TRACe:REF?
<type>,<length>
Query response
ASCii[,0]
REAL,32
REAL,32
ASC,0
REAL,32
REAL,32
None
ASC,0
Command Error –141, “Invalid character data” or
Execution Error –224, “Illegal parameter value”
Attempted to set format to an illegal value.
Execution Error –224, “Illegal parameter value”
Attempted to set format to an illegal value.
None
Command:
FORM:TRAC:REF REAL,32
Query:
FORM:TRAC:REF?
Response:
REAL,32
TRACe[:DATA]?
TRACe[:DATA]:AATS?
TRACe[:DATA]:AATS?
Syntax
Parameters
Suffix Units and
Multipliers
Reset Value
Errors and Events
Dependencies
Examples
Related Commands