Tektronix TVS600 & TVS600A Series Manuel D’Utilisation

INPut Subsystem

TVS600 & TVS600A Command Reference

1.0E+6

Execution Error –222, “Data out of range”
Attempted to set impedance to an illegal value.

Execution Error –241, “Hardware missing”
Attempted to program INPut3 or INPut4 on an 
instrument configured with two channels.

None

Command:

INP1:IMP 1E6

Response:

INP1:IMP?

Query:

1.0E+6

INPut:PROTection:STATe

Queries the attenuation ratio of a connected probe.

A value of 1 indicates that a 1X probe is attached or that no probe is attached.

INPut[1]:PROBe:ATTenuation?

INPut2:PROBe:ATTenuation?

INPut3:PROBe:ATTenuation?

INPut4:PROBe:ATTenuation?

Not applicable

<NR1>

None

Not applicable

Execution Error –241, “Hardware missing”
Attempted to query INPut3 or INPut4 when 
the instrument is configured with two channels.