Tektronix TVS600 & TVS600A Series Manuel D’Utilisation

MEMory Subsystem

TVS600 & TVS600A Command Reference

Sets or queries the instrument settings (or state) for the ten on-board nonvolatile
memory locations. With the query form, you can save the current settings
(SAV0) or one or more of the on board settings (SAV1–10) to a file on your
controller. Later, you can load these settings into the on board storage locations
to run a suite of measurements based on the different instrument configurations.
Use the command *RCL to use an on board instrument setting.

You cannot load a settings file into SAV0 because it is the current or active
instrument settings. You can use the command SYSTem:SET to modify the
current settings with a settings file.

Settings data is transferred in binary format, designated <arbitrary_block_data>,
that is unique to the waveform analyzer.

  

 

SAV0
SAV1
SAV2
.
.
SAV10

Not applicable

<arbitrary_block_data>

<arbitrary_block_data>

Not applicable

Execution Error –141, “Invalid character data”
Attempted to set or query an invalid setting number.

Execution Error –233, “Invalid version”
Attempted to load a block of binary settings that have a different version number
than the instrument.

None