Tektronix TVS600 & TVS600A Series Manuel D’Utilisation

OUTPut Subsystem

TVS600 & TVS600A Command Reference

Command:

OUTP:ECLT0:SOUR BTR

Query:

OUTP:ECLT0:SOUR?

Response:

BTR

OUTPut:ECLTrg<n>
OUTPut:ECLTrg<n>:POLarity

Sets or queries whether the probe compensation signal is output on the front-
panel connector PROBE COMPENSATION. Use the command
OUTPut:PCOMpensate:FUNCtion to select the type of compensation signal.
You can select either CLOCk at 1 kHz and 500 mV peak-to-peak amplitude or
VOLT with a 500 mV DC level.

When compensating probes, use the BNC-to-probe tip adapter recommended by
the probe manufacturer and connect the probe ground lead to signal ground.

OUTPut:PCOMpensate[:STATe] <boolean>

OUTPut:PCOMpensate[:STATe]?

<NRf >
1 or ON
0 or OFF

<NR1>
1
0

0

None

None

Command:

OUTP:PCOM ON

Query:

OUTP:PCOM?

Response:

1