Tektronix TVS600 & TVS600A Series Manuel D’Utilisation
![Tektronix](https://files.manualsbrain.com/attachments/8290919ac2d59d4854d7f6390d5fb3959ff4166e/common/fit/150/50/57e6c08abf656d2a0ea515316e8dc2a0925b9a4e11d84eeaf6a6a2925654/brand_logo.png)
STATus Subsystem
2–164
TVS600 & TVS600A Command Reference
STATus:QUEStionable:ENABle
STATus:QUEStionable:ENABle?
STATus:QUEStionable:ENABle?
Sets or queries the contents of the Questionable Status Enable Register (QSER).
The QSER allows you to individually disable any of the Questionable events
from setting bit 3 in the Status Byte Register. The query returns the current
setting as a decimal number whose bits correspond to the Questionable Status
Register bits. Refer to Table 2–3 on page 2–162 for a definition of the events
associated with the Questionable Status Register bits. For an overview of the
status and event reporting system, refer to the TVS600 & TVS600A Series
Waveform Analyzers User Manual.
The QSER allows you to individually disable any of the Questionable events
from setting bit 3 in the Status Byte Register. The query returns the current
setting as a decimal number whose bits correspond to the Questionable Status
Register bits. Refer to Table 2–3 on page 2–162 for a definition of the events
associated with the Questionable Status Register bits. For an overview of the
status and event reporting system, refer to the TVS600 & TVS600A Series
Waveform Analyzers User Manual.
STATus:PRESet sets all register bits to zero (0) which disables all Questionable
events. Setting unused enable bits does not generate an error, they are ignored.
events. Setting unused enable bits does not generate an error, they are ignored.
STATus:QUEStionable:ENABle <mask>
STATus:QUEStionable:ENABle?
<mask>
Query response
<NRf > | <Non-decimal numeric>
0
0
≤
N
≤
#HFFFF
<NR1>
Not applicable
Execution Error –222, “Data out of range”
Attempted to set the enable register to an illegal value.
Attempted to set the enable register to an illegal value.
None
Command:
STAT:QUES:ENAB #H0001
Query:
STAT:QUES:ENAB?
Response:
1
STATus:PRESet
STATus:QUEStionable?
STATus:QUEStionable:CONDition?
STATus:QUEStionable?
STATus:QUEStionable:CONDition?
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands