Tektronix TVS600 & TVS600A Series Manuel D’Utilisation

Command Syntax

TVS600 & TVS600A Command Reference

 You can use upper case, lower case, or a mixture of both cases for all

commands, queries, and parameters.

OUTPUT1:TTLTRG:POLARITY INVERTED

is the same as

output1:ttltrg:polarity inverted

and

OUTPUT1:ttltrg:polarity INVERTED

 No embedded spaces are allowed between or within nodes.

correct:

OUTPUT1:TTLTRG:POLARITY INVERTED

incorrect:

OUTPUT1: TTLTRG: POLARITY INV ERTED

ANSI/IEEE Standard 488.2 defines the codes, formats, protocols, and usage of
common commands and queries used on the interface between the controller and
the instruments. The waveform analyzer complies with this standard.

The syntax for an IEEE 488.2 common command is an asterisk (*) followed by a
command and, optionally, a space and parameter value. The syntax for an 
IEEE 488.2 common query is an asterisk (*) followed by a query and a question
mark. All of the common commands and queries are listed in the last part of the
Syntax and Commands section. The following are examples of common
commands:

 *ESE 16

 *CLS

The following are examples of common queries:

 *ESR?

 *IDN?