Tektronix TVS600 & TVS600A Series Manuel D’Utilisation
TRIGger:PULSe Subsystem
2–280
TVS600 & TVS600A Command Reference
TRIGger:PULSe:WIDTh:POLarity
TRIGger:PULSe:WIDTh:POLarity?
TRIGger:PULSe:WIDTh:POLarity?
Sets or queries the polarity of the pulse used for pulse width triggering. Use the
command TRIGger:PULSe:WIDTh:QUALify to set whether the trigger event is
for pulses inside or outside the limits (LLIMit and HLIMit).
command TRIGger:PULSe:WIDTh:QUALify to set whether the trigger event is
for pulses inside or outside the limits (LLIMit and HLIMit).
This command is active only when you set TRIGger:TYPE to PULSe and
TRIGger:PULSe:CLASs to WIDTh.
TRIGger:PULSe:CLASs to WIDTh.
TRIGger[:A]:PULSe:WIDTh:POLarity<polarity>
TRIGger[:A]:PULSe:WIDTh:POLarity?
<polarity>
Query response
NEGative
POSitive
POSitive
NEG
POS
POS
POS
Execution Error –224, “Illegal parameter value”
Attempted to set polarity to an illegal value.
Attempted to set polarity to an illegal value.
None
Command:
TRIG:PULS:WIDT:POL NEG
Query:
TRIG:PULS:WIDT:POL?
Response:
NEG
TRIGger:TYPE
TRIGger:PULSe:CLASs
TRIGger:PULSe:CLASs
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands