Tektronix TVS600 & TVS600A Series Manuel D’Utilisation
![Tektronix](https://files.manualsbrain.com/attachments/8290919ac2d59d4854d7f6390d5fb3959ff4166e/common/fit/150/50/57e6c08abf656d2a0ea515316e8dc2a0925b9a4e11d84eeaf6a6a2925654/brand_logo.png)
AVERage Subsystem
2–16
TVS600 & TVS600A Command Reference
AVERage:TYPE
AVERage:TYPE?
AVERage:TYPE?
Sets or queries the mode of acquisition to perform:
SCALar (average), the default, averages each new sample point with the
corresponding point in the previous acquisition record.
ENVelope generates a waveform record of interleaved MAX/MIN pairs of
sample points (the number of pairs is SWEep:POINts divided by two).
PEAKdetect (TVS600A only) generates an array of MAX/MIN pairs, but
uses hardware peak detect to capture glitches between sampling intervals.
The AVERage:TYPE setting affects all channels.
Peak Detect hardware is not functional at a sample rate faster than 100 MS/s.
When peak detect is enabled on rates faster than 100 MS/s, the instrument will
function as if in ENVelope mode and will not issue any warning or error to that
effect.
When peak detect is enabled on rates faster than 100 MS/s, the instrument will
function as if in ENVelope mode and will not issue any warning or error to that
effect.
[SENSe:]AVERage:TYPE <type>
[SENSe:]AVERage:TYPE?
<type>
Query response
ENVelope
SCALar
PEAKdetect
SCALar
PEAKdetect
1
ENV
SCAL
PEAK
SCAL
PEAK
1
1
TVS600A only
Syntax
Parameters