Tektronix TVS600 & TVS600A Series Manuel D’Utilisation
CALCulate Subsystem
2–24
TVS600 & TVS600A Command Reference
CALCulate:DATA? (Query Only)
This query returns the results of waveform processing and measurement
functions performed on acquired waveform records. The default format of the
returned data is ASCII. However, you can set the data format with the
FORMat:CALCulate command.
functions performed on acquired waveform records. The default format of the
returned data is ASCII. However, you can set the data format with the
FORMat:CALCulate command.
Results are returned only when pending acquisitions and calculations are
complete. The synchronizing commands *WAI, *OPC, and *OPC? are not
required unless you wish to synchronize the transfer differently.
complete. The synchronizing commands *WAI, *OPC, and *OPC? are not
required unless you wish to synchronize the transfer differently.
The CALCulate and TRACe subsystems use consistent naming, such that
CALC1:DATA? is equivalent to TRAC? CALC1.
CALC1:DATA? is equivalent to TRAC? CALC1.
CALCulate<n>:DATA?
<n>
1
Query response
1
2
3
4
2
3
4
Not applicable
1
The calculate block number <n> selects one of four calculate blocks. If you omit <n>,
the default is calculate block 1.
the default is calculate block 1.
Not applicable
Execution Error –230, “Data corrupt or stale”
Attempted to query data that is invalid, incomplete or stale.
Attempted to query data that is invalid, incomplete or stale.
None
Query:
CALC1:DATA?
Response:
<arb_block_data>
[SENSe:]DATA?
[SENSe:]DATA:PREamble?
CALCulate:DATA:PREamble?
TRACe?
TRACe:PREamble?
[SENSe:]DATA:PREamble?
CALCulate:DATA:PREamble?
TRACe?
TRACe:PREamble?
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands