Audiovox LCM7N 7 Manuel D’Utilisation
Monitor Setting
The color display is equipped with OSD prompting for the monitor settings. All settings must be changed
using the remote control.
using the remote control.
Invoking the OSD:
1. Remove the remote control from the cradle.
2. Press the - and + buttons at the same time.
3. The OSD menu "Monitor Settings" is displayed.
4. In the OSD menu, you can adjust the following settings:
•
Volume:
Adjust volume level of the built-in monitor speaker.
•
Dimming:
Adjust day brightness when light outside.
Adjust night brightness when dark outside.
•
Display Mode: Select screen display mode. The selected setting is indicated in a yellow bar.
Possible selections include:
"Normal" (4:3)
"Full Screen" (16:9)
"Cinema"
"Wide 1"
"Wide 2"
"Full Screen" (16:9)
"Cinema"
"Wide 1"
"Wide 2"
•
Setup Menu:
Select the following setup parameters:
-
Dim.Contr.: Auto/Auto off: Automatic brightness control On/Off. With
"Auto" selected, the display brightness is automatically adapted to
the ambient lighting.
"Auto" selected, the display brightness is automatically adapted to
the ambient lighting.
-
Mount. Pos: high/Low: Adaptation of the display brightness to the
monitor mounting position high/low.
monitor mounting position high/low.
-
Speaker: On/Off: Controls the built-in loudspeaker On/Off.
-
Monitor: 1,2 or 3: Must be set for 1.
Adjusting Setting:
1. Press the - and + buttons at the same time.
2. Press the down arrow button (
) to select the desired menu item.
3. Press the right arrow button (
X) to adjust the selected menu item. Confirm by pressing the O.K.
button.
If you use the built-in monitor loudspeaker, set the volume level in the OSD menu to the middle
setting. Use the + and - buttons on the remote control to adjust the navigation audible messages.
setting. Use the + and - buttons on the remote control to adjust the navigation audible messages.
-3-