Emerson XDCF Manuel D’Utilisation

Use of only the lower Liebert XDCF module requires attaching a Liebert XD Flex Pipe support panel 

and three pipe retainers. The retainers keep the refrigerant pipes behind the Egenera cabinet. If an 

upper Liebert XDCF module will be used, the Liebert XD Flex Pipe retainers will be attached to the 

upper module.
To attach the Liebert XD Flex Pipe support panel:
1. Position the Liebert XDCF Liebert XD Flex Pipe support panel over the line of four holes above 

the right edge of the lower Liebert XDCF module

2. Secure the Liebert XD Flex Pipe support panel to the cabinet by inserting and tightening four 

screws on the panel’s flange. Tighten the fasteners securely with a screwdriver, either a Phillips 

or a blade-type.

3. Attach the three pipe retainers:

a. Slip the front end of a retainer into a slot on the Liebert XD Flex Pipe support panel.
b. Insert a panel fastener into the retainer and thread it into the captive panel nut.
c. Tighten the fastener securely, using a screwdriver, either a blade-type or Phillips.
d. Repeat Steps a and c for the other retainers.

Liebert XD
Flex Pipe
Support Panel

Liebert XD
Flex Pipe
Retainers

Captive Panel 
Fastener 

Captive 
Panel 
Nuts 

Captive 
Panel 
Nut 

Captive Panel 
Fastener 

Liebert XD
Flex Pipe
support
panel and
retainers

Lower
CF unit