Liebherr 200514 Manuel D’Utilisation

u

Remove the drawer.

u

Clean the ice cube tray with warm water. If necessary, use

mild washing-up liquid. Then rinse.

Switch the IceMaker on again.

u

Press the ON/OFF button until the LED shines, then slide in

the drawer.

w

The IceMaker starts producing ice cubes.

If washing-up liquid was used:

u

throw away the first three loads of ice cubes to get rid of any

remaining washing-up liquid.

First check whether you can correct the fault yourself by refer-

ence to the list (see Malfunction). If this is not the case, please

contact  the  customer  service  whose  address  is  given  in  the

enclosed customer service list.

Risk of injury if repair work is not carried out professionally!

u

Have  any  repairs  and  action  -  not  expressly  specified  -  on

the  appliance  and  mains  cable  carried  out  by  service

personnel only. (see Maintenance)

u

Read  the  appliance

designation

Fig.  17  (1)

,  service

No.

  Fig.  17  (2)

  and

serial  No.

  Fig.  17  (3)

off  the  type  plate

located  inside  the

appliance  on  the  left-

hand side.

Fig. 17 

u

Notify  the  customer  service,  specifying  the  fault,  appliance

designation

 Fig. 17 (1)

, service No.

 Fig. 17 (2)

 and serial No.

Fig. 17 (3)

.

w

This will help us to provide you with a faster and more accu-

rate service.

u

Keep  the  appliance  closed  until  the  customer  service

arrives.

w

The food will stay cool longer.

u

Pull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

Your  appliance  is  designed  and  manufactured  for  a  long  life

span  and  reliable  operation.  If  a  malfunction  nonetheless

occurs during operation, check whether it is due to a handling

error.  In  this  case  you  will  have  to  be  charged  for  the  costs

incurred, even during the warranty period. You may be able to

rectify the following faults yourself:
Appliance does not work.

→

The appliance is not switched on.

u

Switch on the appliance.

→

The power plug is not properly inserted in the wall socket.

u

Check power plug.

→

The fuse of the wall socket is not in order.

u

Check fuse.

→

The compressor switches to a low speed when little cold is

needed. Although the running time is increased as a result,

energy is saved.

u

This is normal in energy-saving models.

→

SuperFrost is activated.

u

The compressor runs for longer in order to rapidly cool the

food. This is normal.

→

The inverter is equipped with a diagnostic LED.

u

The flashing is normal.

→

Due  to  the  various  speed  steps,  speed-regulated*

compressors can generate different running noises.

u

The sound is normal.

→

This noise comes from the refrigerant flowing in the refriger-

ation circuit.

u

The sound is normal.

→

The  noise  is  produced  whenever  the  refrigeration  unit

(motor) automatically switches on or off.

u

The sound is normal.

→

The  refrigeration  increases  automatically  when  the  Super-

Frost, function is activated, fresh food has just been placed

in the appliance or the door has been left open for a while.

u

The sound is normal.

→

The ambient temperature is too high.

u

→

The sound is produced by air flow noise of the fan.

u

The sound is normal.

→

The appliance is not fixed to the ground. The running of the

cooling unit therefore makes objects and adjacent furniture

vibrate.

u

Adjust appliance via the height-adjustable feet.

u

Move bottles and containers apart.

→

When  water  is  pumped  out  of  the  water  reservoir,  a  brief

hum of the pump can be heard.

u

The sound is normal.

→

There is a fault.

u

Please contact the after-sales service (see Maintenance).

→

Demo mode is activated.

u

Please contact the after-sales service (see Maintenance).

→

The  heat  of  the  refrigeration  circuit  is  used  to  prevent

condensate from forming.

u

This is normal.

→

The  appliance  and  therefore  the  IceMaker  are  not

connected.

u

Connect the appliance to the mains (see Putting into opera-

tion).

→

The IceMaker is not switched on.

u

Switch on the IceMaker.

→

The drawer of the IceMaker is not properly closed.

u

Close the drawer properly.

→

The water tank is not correctly inserted.

u

Insert the water tank.

→

There is not enough water in the water tank.

u

Fill the water tank.