Hearth & Home Technologies VRT-GR-B-CE Manuel D’Utilisation

25

Heat & Glo  •  VRTIKL-CE  •  7031-292 Rev E  •  12/07

The manufacturer recommends securing the lag bolt from 
the component bag in the center hole in the bottom plate 
(clearance hole). This bolt will help to prevent tipping for-
ward.

Using pliers, adjust the counter screws to level the gas 
stove.

Install approved accessories per instructions included with 
accessories.  Refer to Section 12F for appropriate acces-
sories.

Shock or fi re risk.
Use ONLY optional accessories approved for 
this gas stove.
•  U s i n g   n o n - l i s t e d   a c c e s s o r i e s   v o i d s 

warranty.

•  Using non-listed accessories may result in a 

safety hazard.

•  Only Hearth & Home Technologies approved 

accessories may be used safely.

4. 

Remove the inner extension collar (Shown in Figure 
8.7) and set aside.

5. 

Remove the four screws from the DV adapter collar 
(Figure 8.7). Set aside DV adapter collar and 
screws.

3. 

Remove and retain the Allen head screws that hold 
the solid back panel in place (Figure 8.8). Remove 
and discard the solid back panel.

KIT CONTENTS:  Top cover (without hole); 
 

 

     Back panel (with hole).

1. 

Remove the front door assembly by pulling bottom 
of front away from gas stove and lifting it off of the 
hooks on top of the gas stove.  Set door aside.

ON TOP OF APPLIANCE:
2. 

Remove the top plate with hole and discard. (Figure 8.6)