Hearth & Home Technologies VRT-GR-B-CE Manuel D’Utilisation

5

Heat & Glo  •  VRTIKL-CE  •  7031-292 Rev E  •  12/07

Check building codes prior to installation.
•  Installation MUST comply with local, regional, state 

and national codes and regulations.

•  Consult local building, fi re offi cials or authorities having 

jurisdiction about restrictions, installation inspection, 
and permits.

Heat & Glo direct fl ue gas stoves are designed to operate 
with all combustion air siphoned from outside of the building 
and all exhaust gases expelled to the outside. No additional 
air source is required.

When planning an installation, it is necessary to determine 
the following information before installing.

•  Installation and use of any damaged gas stove or fl ue 

system component.

• Modifi cation of the gas stove or fl ue system.
•  Installation other than as instructed by Hearth & Home 

Technologies.

•  Improper positioning of the gas logs or the glass door.
•  Installation and/or use of any component part not 

approved by Hearth & Home Technologies.

Hearth & Home Technologies disclaims any 
responsibility for, and the warranty will be 
voided by, the following actions: 

Inspect gas stove and components for 
damage. Damaged parts may impair safe 
operation.

•  Do NOT install damaged components.
•  Do NOT install incomplete components.
•  Do NOT install substitute components.

Report damaged parts to dealer.

•  Carefully remove the gas stove and components from 

  

the packaging.

•  Remove door and set aside on protective surface. 

•  Remove log set and component pack from fi rebox.

•  Report to your dealer any parts damaged in shipment, 

particularly the condition of the glass.

•  Where the gas stove is to be installed.

• The 

fl ue system confi guration to be used.

•  Gas supply piping.

• Electrical 

wiring.