KitchenAid KERC506 Manuel D’Utilisation

(on some models)

Do not clean in the Self-Cleaning cycle.

■

Solution of 

¹₂ cup (125 mL) ammonia to 1 gal. (3.75 L) water:

Soak for 20 minutes, then scrub with stainless steel wool pad.

■

Oven cleaner:

Follow product label instructions.

■

Mildly abrasive cleanser:

Scrub with wet scouring pad.

■

Dishwasher

(on some models)

To avoid product damage, do not remove the cooktop.
For more information, see “Lift-up Cooktop” section.

■

Steel-wool pad

■

Glass cleaner and paper towels or nonabrasive plastic 
scrubbing pad:

Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

Do not use abrasive cleaners, steel-wool pads, gritty washcloths 
or some paper towels. Damage may occur.

■

Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.

■

Self-Cleaning cycle:

See “Self-Cleaning Cycle” first.

■

Self-Cleaning cycle:

See “Self-Cleaning Cycle” first. Remove racks or they will 
discolor and become harder to slide. If this happens, a light 
coating of vegetable oil applied to the rack guides will help 
them slide.

■

Steel-wool pad

Do not clean in the Self-Cleaning cycle (on some models).

■

Mildly abrasive cleanser:

Scrub with wet scouring pad.

■

Solution of 

¹₂ cup (125 mL) ammonia to 1 gal. (3.75 L) water:

Soak for 20 minutes, then scrub with scouring or steel-wool 
pad.

■

Oven cleaner:

Follow product label instructions.

■

Dishwasher

TEMPERATURE PROBE (on some models)

■

Plastic scouring pad

The cooktop light is located on the top of the control panel. It has 
2 replaceable parts. The cooktop light is a 20-watt cool-white 
fluorescent tube. The starter is a knob-shaped part located on the 
right side of the backguard, under the light bulb.
Before replacing, make sure the range is off and cool.

1. Unplug range or disconnect power.
2. Flip up the top of the control panel.

3. Grasp both ends of the fluorescent tube.
4. Turn the tube 90° in either direction until both ends come out 

of the receptacles.

5. Replace tube, replace top of the control panel.
6. Plug in range or reconnect power.