Danby DER2009W Manuel D’Utilisation

INSTALLATION INSTRUCTIONS

ELECTRIC AND CERAN-TOP RANGES

READ AND SAVE THESE INSTRUCTIONS

WARNING:

• If the information in this manual is not followed exactly, a fire or electrical shock may result causing

property damage, personal injury or death.

• This appliance must be properly grounded.

IMPORTANT:

• Save these instructions for the local electrical inspector’s use.
• Observe all governing codes and ordinances.

BEFORE STARTING

INSTALLER:
•  Read all instructions contained in these installation instructions before installing range.
•  Leave installation instructions with homeowner.
•  Proper installation is the responsibility of the installer.

HOMEOWNER:
•  Keep installation instructions for future reference.

PARTS INCLUDED

TOOLS YOU WILL NEED

• Anti-Tip bracket
• Anchor sleeves

•

Bolts

•  Adjustable wrench or channel lock pliers
•  Phillips screwdriver
•  Electric or hand drill
•  Wood floors: 3/16” drill bit
•  Concrete/ceramic floors: 13/32” carbide-

tipped masonry drill bit

• 3/8” nut driver

•  Tape measure
•  Safety glasses
•  Pencil
•  Level
•  Hammer (may be needed for anchors)

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

For personal safety, remove house fuse or open circuit breaker before beginning installation.

Failure to do so could result in serious injury or even death.

• All clearances and spacing dimensions must be met for safe use of your range.
• Be sure your appliance is properly installed and grounded by a qualified technician.

ANTI-TIP DEVICE

WARNING:

To reduce the risk of tipping, the range must be secured by properly installed anti-tip bracket

provided with the range.

All ranges can tip.
•  Injury to persons could result.
•  Install anti-tip device packed with range.
•  See Installation Instructions.

If you pull the range out and away from the wall for any reason, make sure the Anti-Tip bracket is engaged when the range
is pushed back against the wall.