Furuno 1734C Instruction De Maintenance
2. RADAR OPERATION
2-34
2.25.7 ARP, TTM target data
You can show motion trends (range, bearing, course, speed, CPA and TCPA) for ARP or
TTM targets.
1. Place the cursor on the target whose data you want to see.
2. If not already displayed, press the HIDE/SHOW key to show the radar soft keys.
3. Press the TARGET and TARGET INFO soft keys. The data of the selected target
TTM targets.
1. Place the cursor on the target whose data you want to see.
2. If not already displayed, press the HIDE/SHOW key to show the radar soft keys.
3. Press the TARGET and TARGET INFO soft keys. The data of the selected target
appears at the bottom left-hand corner of the display. (If an EBL/VRM data box is
displayed the ARP (TTM) data box will be under it.)
displayed the ARP (TTM) data box will be under it.)
4. Press the RETURN soft key to finish.
To erase ARP/TTM target data, select the corresponding target with the cursor, then press
the CLEAR key.
To erase ARP/TTM target data, select the corresponding target with the cursor, then press
the CLEAR key.
.250/ 319.9
°
T
.125nm
SP
SP
H-UP
359.9
°
R
0.240nm
TARGET
TRAIL
TLL
OUTPUT
OUTPUT
ACQ
TARGET
INFO
INFO
RETURN
ARP
Target
Target
No.01 VECTOR TRUE 15min
CSE 359.9
CSE 359.9
°
T SPD 12.5kt
CPA 2nm TCPA 12.35
CPA and TCPA
Course and Speed
Target No., Vector Reference (True), Vector Time
01
Cursor
+
+
ARP target data