Philips BDL4245E Manuel D’Utilisation

BDL3245E / BDL4245E / BDL4645E

5

1

9

2

3

4

5

6

7

8

1

Use this button to turn the display on or put the display to standby.

2

Switch the audio mute ON/OFF.

3

•  Use this button to select the input source.
•  When the On Screen Display menu is active, this is also used as 

the [SET] button.

4

Increase the adjustment while OSD menu is on, or increase the 

audio output level while OSD menu is off.

5

Decrease the adjustment while OSD menu is on, or decrease the 

audio output level while OSD menu is off.

6

Move the highlight bar up to adjust the selected item while OSD 

menu is on.

7

Move the highlight bar down to adjust the selected item while OSD 

menu is on.

8

Return to previous menu while OSD menu is on, or to activate the 

OSD menu when OSD menu is off.

NOTE:   “Keyboard Control Lock Mode” This function completely 

disables the access to all Keyboard Control functions. To 

enable or disable the keyboard control lock, press both [ ] 

and [ ] buttons and hold down continuously for more than 

3 (three) seconds.

9

•  Receives command signals from the remote control.
•  Indicates the operating status of the display:

 - Lights green when the display is turned on
 - Lights red when the display is in standby mode
 - Lights amber when the display enters DPMS mode
 - When {SCHEDULE} is enabled, the light blinks green and red
 - If the light blinks red, it indicates that a failure has been 

detected

 - Off when the main power of the display is turned off