Topcon GPT-2000 Manuel D’Utilisation
16 SELECTING MODE
16-1
16
SELECTING MODE
16.1 Items of the Selecting Mode
The following modes are available.
Menu
Items
Selecting item
Display
1:
UNIT SET
UNIT SET
TEMP. &
PRES.
°C / °F
hPa / mmHg /
hPa / mmHg /
inHg
Select the unit of temperature for atmospheric
correction. Select the unit of air pressure for
atmospheric correction .
atmospheric correction .
ANGLE
DEG(360°) /
GON(400G) /
MIL(6400M)
GON(400G) /
MIL(6400M)
Choose degree, gon or mil unit for measuring
angle.
DISTANCE
METER / FEET /
FEET and inch
FEET and inch
Choose measuring unit for distance meter , feet
or feet and inch
FEET
US SURVEY /
INTERNATIONAL
INTERNATIONAL
Select the meter / feet conversion factor.
US SURVEY feet
1m=3.280833333333333 ft.
INTERNATIONAL feet
1m=3.280839895013123 ft.
US SURVEY feet
1m=3.280833333333333 ft.
INTERNATIONAL feet
1m=3.280839895013123 ft.
2:
MODE
MODE
SET
POWER ON
MODE
ANGLE MEAS./
DISTANCE MEAS.
DISTANCE MEAS.
Select to set the measurement mode for angle or
distance when the power is turned on.
FINE/CRS/
TRK
TRK
FINE / COARSE /
TRACK
Select Fine /Coarse / Tracking mode in distance
measurement mode, when the power is turned
on.
on.
HD&VD/SD
HD&VD /SD
Specify which is displayed first, horizontal and
vertical distance or slope distance, when the
power is turned on.
power is turned on.
V ANGLE
Z0/H0
Zenith 0 /
Horizontal 0
Choose the vertical angle reading from zenith or
from level.
N-TIMES /
REPEAT
REPEAT
N-TIMES /
REPEAT
Select the measurement mode for distance
when the power is turned on.
TIMES OF
MEAS.
0~99
Set N (number of times) for times of distance
measurement. When setting number of times as
1, it is single measurement.
1, it is single measurement.
NEZ / ENZ
NEZ / ENZ
Select a coordinate displaying order either NEZ
or ENZ.
HA
MEMORY
ON / OFF
Horizontal angle set can be retained after the
power is turned off.
ESC KEY
MODE
DATA COLLECT /
LAYOUT / REC /
LAYOUT / REC /
OFF
You can select a function of the [ESC] key.
DATA COLLECT / LAYOUT: It is possible to
enter data input mode (in DATA COLLECT) or
Layout Menu from normal measuring mode
directly.
enter data input mode (in DATA COLLECT) or
Layout Menu from normal measuring mode
directly.
REC: While executing normal or offset
measuring, the measuring data can be output.
OFF: Returns to normal function.
COORD.
CHECK
CHECK
ON / OFF
Select coordinate displaying ON or OFF when
setting a point.