Topcon GPT-2000 Manuel D’Utilisation

   8 LAYOUT

8-9

The following methods can be selected for executing a Layout:
1) Recalling points from internal memory by point number.
2) Direct key input of coordinate values.
Example setting : Recalling point from internal memory.

Press the [F3](LAYOUT) key from the layout menu 
1/2.

[F3]

Press the [F1](INPUT) key, and enter PT#. *1)
Press the [F4](ENT) key. *2)

[F1]

Enter PT#

[F4]

Enter reflector height in the same way.

When the layout point is set, the instrument will 
start  layout calculation.
HR: Calculated horizontal angle of the layout point
HD: Calculated horizontal distance from the
        instrument to the layout point

[F1]

Enter R.HT

[F4]

Collimate the prism, and press the [F1](ANGLE) 
key.
PT#:  Layout point
HR:    Measured (Actual) horizontal angle.
dHR:  Horizontal angle to be turned to the layout
          point = Actual horizontal angle - Calculated
          horizontal angle.
          Correct direction when dHR = 0°00'00"

Collimate P

[F1]

Press the [F1](DIST) key.
HD:    Measuring (Actual) horizontal distance
dHD:  Horizontal distance to be turned to the
          layout point = Actual horizontal distance –
          Calculated horizontal distance.
dZ:     Vertical distance to be turned to the layout
          point = Actual vertical distance – Calculated
          vertical distance. 

[F1]

Press the [F1](MODE) key.
The fine mode measuring starts.

[F1]

  

↓