DELL 34XX Manuel D’Utilisation

enclosureIDN,drawerIDN,slotIDN) [enclosureLossProtect=(TRUE | FALSE)]

[dataAssurance=(none | enabled)]

recreate storageArray replicationRepository

repositoryDiskGroup=diskGroupName

[freeCapacityArea=freeCapacityIndexNumber]

recreate storageArray replicationRepository 

repositoryRAIDLevel=(1 | 5 | 6) 

repositoryPhysicalDiskCount=numberOfPhysicalDisks [physicalDiskType=(SAS)] 

[enclosureLossProtect=(TRUE | FALSE)] 

[dataAssurance=(none | enabled)]

Parameters

Parameter

Description

repositoryRAIDLevel

The RAID level for the replication repository virtual 
disk. Valid values are 1, 5, or 6.

repositoryPhysicalDisks

The physical disks for the replication repository 
virtual disk. Specify the enclosure ID and slot ID for 
each physical disk that you assign to the replication 
repository virtual disk. Enclosure ID values are 0 to 
99. Slot ID values are 1 to 32. Enclose the 
enclosure ID values and the slot ID values in 
parentheses.

repositoryDiskGroup

The name of the disk group where the replication 
repository virtual disk is located.

freeCapacityArea

The index number of the free space in an existing 
disk group that you want to use to re-create the 
replication repository virtual disk. Free capacity is 
defined as the free capacity between existing 
virtual disks in a disk group. For example, a disk 
group might have the following areas: virtual disk 1, 
free capacity, virtual disk 2, free capacity, virtual 
disk 3, free capacity. To use the free capacity 
following virtual disk 2, you would specify:
freeCapacityArea=2

Run the show diskGroup command to determine 

if a free capacity area exists.

repositoryPhysicalDiskCount

The number of unassigned physical disks that you 
want to use for the replication repository virtual 
disk.

enclosureLossProtect

The setting to enforce enclosure loss protection 
when you create the replication repository virtual 

240