Navman 4433 Manuel D’Utilisation

Specifications

FISH 4432

FISH 4433

Display type:

16 Greyscales

Screen Resolution 360 high x 240 wide(pixels)

White LED backlighting

Display size:

4.3” (110mm) diagonal

Supply voltage:

10 to 16V DC

Supply current at 13.8 V:

170 mA min - no backlighting
250 mA max - full backlighting

Operating temperature:

32° to 122°F (0° to 50°C)

Environment:

IPx6 and IPx7

Standards Compliance EMC:

USA FCC Part 15 Class B

Europe (CE) EN60945 (EMC only)

New Zealand and Australia (C-Tick) CISPR 22

Depth:

2 ft (0.6 m) to 750ft with supplied transducer.

Depth capabilities of transducer used and installation and water clarity.

Output power:

Variable, up to 250W RMS

Dual Transducer frequency:

200 kHz / 83 kHz

Receiver sensitivity:

Better than 10 micro volts RMS
Dynamic range 4.0 million to 1 (120 dB)

Typical depth acquisition time
from startup:

2 seconds at 100 ft (30 m)

Transom transducer cable
length:

33 ft (10 m)

26 ft (8 m)

Temperature measurement
range:

32° to 99.9°F (0° to 37.7°C) Resolution of 0.1° unit

Speed range:

1 to 50 kn (57.5 mph, 96.6 kph)

Communications:

NMEA 0183 (Ver 2.0) 4800 baud
NavBus

NMEA Output:
NMEA (0183) is a standard for
interfacing marine electronic
devices. The Navman
fishfinder can output the
following sentences

DBT (Depth Below Transducer)

DPT (Depth and Keel offset)

VHW (Speed)

VLW (Distance traveled – Total & Trip)

MTW (Sea Water temperature)

XDR (Battery voltage and fuel flow)

Fuel Computer:*
(optional fuel transducer(s)
required)

*4433 only

Outboard carbureted two stroke and EFI petrol/gasoline
engines: 30 to 300 hp

Outboard four stroke petrol/gasoline engines: 90 to 300 hp
Inboard petrol/gasoline engines: 50 to 300 hp

Minimum flow rate: 1.3 U.S. gallons per hour (5 litres per hour)

Maximum flow rate: 34 U.S. gallons per hour (130 litres per hour)

SmartCraft Support:

Yes, single engine

Appendix A - Specifications

FISH 4432/4433 Installation and Operation Manual

NAVMAN