Furuno 1833C Manuel D’Utilisation

Page de 100
1-4 
 
1.2 
Mounting of Antenna Unit for MODEL1833C 
1.2.1 Mounting 
considerations 
When selecting a mounting location for the antenna unit keep in mind the following points. 
 
• 
Install the antenna unit on the hardtop, radar arch or on a mast on an appropriate 
platform. (For sailboats, a mounting bracket is optionally available.) It should be placed 
where there is a good all-round view with, as far as possible, no part of the ship’s 
superstructure or rigging intercepting the scanning beam. Any obstruction will cause 
shadow and blind sectors. A mast, for instance, with a diameter considerably less than 
the width of the antenna unit, will cause only a small blind sector. However, a horizontal 
spreader or crosstrees in the same horizontal plane would be a much more serious 
obstruction; place the antenna unit well above or below it. 
Antenna unit
Antenna unit
Antenna unit
Antenna unit
 
Typical antenna unit placement on sailboat and powerboat 
 
• 
In order to minimize the chance of picking up electrical interference, avoid where possible 
routing the antenna cable near other electrical equipment onboard. Also avoid running 
the cable in parallel with power cables. 
• 
The compass safe distance of 0.90 meters (standard compass) and 0.70 meters (steering 
compass) should be observed to prevent deviation of the magnetic compass.