Furuno 1850WDF Manuel D’Utilisation
1. INSTALLATION
1-20
1.4 Installation
of
Sensors
Transom mount water temperature sensor T-02MTB
•
Fix the cable at a convenient location with cable clamp.
•
When the cable is led in through the transom board, make a hole of approx. 17 mm
diameter to pass the connector. After passing the cable, fill the hole with a sealing
compound.
diameter to pass the connector. After passing the cable, fill the hole with a sealing
compound.
D>50 cm
D
M5 x 20
Mount sensor
flush with hull bottom.
flush with hull bottom.
How to install transom mount water temperature sensor T-02MTB