Kenwood TK-3230 Manuel D’Utilisation

You can set the transceiver to sound an alert tone when you 

are able to transmit (transmission is no longer inhibited).  
1

  With the transceiver power OFF, press and hold the MENU 

key while turning the transceiver power ON (for 1 second).

  Press the   or   key to select “   ”.

  Press the MENU key then press   or   to select “ 

 ” 

(VOX proceed tone on) or “ 

 ” (VOX proceed tone off).

•  You can speak into the microphone at this time to simulate 

transmitting.  The LED lights orange while speaking if your 

voice is at an appropriate level, but no signal is transmitted at 

this time. 

  Press the MENU key to exit the selection.

  Press the PTT, MON, or CAL key to exit Setting Mode.