Regency IG34-ULPG Manuel D’Utilisation

Regency IG34 Gas Inbuilt Fireplace

1)  Install faceplate and door frame as per previous page.

2)  After faceplate has been installed - place  the touch pad (facing 
    out) in the knockout located on the left side of the faceplate.

3)  Secure with 2 screws as shown below.

4)  Take the limit switch harness and slide the thermodisc into the    
      bracket located on the top backside of the faceplate.  Secure with 
      2 screws as shown below.

5)  Secure wiring along the vertical right side of the faceplate 
     (facing the back of the faceplate) with supplied grey adhesive clips.

6)  Slide unit into fi nal position.