Graco PD213671A Manuel D’Utilisation

Page de 96
26
6.1 Installing the Infant Restraint Without  
      Base Using Vehicle Belt
6.0 How to Install the Infant Restraint/Base
You must carefully follow the instructions provided by your  
vehicle manufacturer, in addition to the information in this  
manual. Before proceeding be sure you have read and  
understood section 4, “Choosing an Appropriate 
Vehicle Seat Location” on pages 13-19. 
Make sure the buckle tongue goes into the correct 
buckle ™. The seat belt should not be twisted 
or turned.
Make sure vehicle is on level ground š 
so that the level indicator can be used to 
properly recline the infant restraint.
Refer to your vehicle owner’s manual and 
the instructions in “4.2.2 SAFE Vehicle Belt 
Systems”, page 16-18, on tightening your 
vehicle belt when using the infant restraint 
without base.
If a front passenger seat is used (see air bag 
warning, page 4), slide the vehicle seat 
rearward as far as possible from the  
dashboard. If a rear seat is used, make 
sure the seat in front of it is moved forward enough and is upright 
enough to allow room for the infant restraint.
š
™