Graco PD213671A Manuel D’Utilisation

30

1. MAKE SURE vehicle is on level ground. Make sure to check your  

    vehicle owner's manual for LATCH seating  

    positions.

2. For ease of installation, press button to extend  

    LATCH to its MAXIMUM LENGTH ™.

3. Position base in vehicle seat as shown.
4. Make sure LATCH is through vehicle/LATCH 

    belt path normally used for vehicle seat belt. š.  

    Belt must lie flat and not be twisted. 

5. Attach connectors to vehicle lower anchors. 
    Pull firmly on connectors to be sure they  

    are attached ›.

6. Tighten LATCH by pushing down hard on  

    base and pulling the adjustment belt back  

    through belt path œ.  

œ

š

™

›

CLICK!