3com WXR100 3CRWXR10095A Manuel D’Utilisation

C

HAPTER

 19: RF D

ETECTION

 C

OMMANDS

„

„

Disables or reenables active RF detection scanning on a WX switch. When 
active scanning is enabled, the MAP radios managed by the switch look 
for rogue devices by sending probe any requests (probe requests with a 
null SSID name), to solicit probe responses from other access points. 

Syntax —

 set rfdetect active-scan {enable | disable}

„

 — Enables active RF detection scanning.

„

 — Disables active RF detection scanning.

Defaults — Active scanning is enabled by default.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — You can enter this command on any WX switch in the Mobility 
Domain. The command takes effect only on that switch. 

Examples — The following command disables active scanning on a WX 
switch:

WX1200# set rfdetect active-scan disable

success:  off-channel scanning is disabled.

RSSI

Received signal strength indication (RSSI)—the strength of the 
RF signal detected by the MAP radio, in decibels referred to 
1 milliwatt (dBm).

Flags

Classification and encryption information for the rogue:

„

The i, a, or u flag indicates the classification.

„

The other flags indicate the encryption used by the rogue.

For flag definitions, see the key in the command output.

SSID

SSID used by the detected device.

Table 109   display rfdetect visible Output (continued)