Audiovox Car DVD Player/Monitor Combo Manuel D’Utilisation

- 9 -

1) Choose  an appropriate mounting location

underneath a cabinet or shelf. Close proximity to
an electrical  outlet and a  TV antenna or cable
connection will facilitate a neat, easy installation.
Do not  mount  the VE1040 above  a range or
oven.  Be sure that the  location chosen  will
provide  adequate  access  to  the electrical
connection  on  the  rear  of  the  unit  before
continuing.

2) If the location chosen has bottom edge molding it

may be necessary  to  use the mounting spacers
provided to effectively  lower the  VE1040 below
or  even with the  molding. Measure the  distance
between the bottom and  the  bottom of  the
cabinet. For large molding choose a combination
of spacers which will allow the  VE1040 to be
secured to the bottom of the cabinet.

3) Measure  the thickness of the bottom  of  the

cabinet  or shelf and the spacers chosen. Select
the  shortest screw length  which  will  secure the
VE1040 to the bottom of the cabinet.

4) Cut out the template supplied and tape it in place

onto  the cabinet surface to be drilled. Center
Punch  the  four holes indicated  on  the template
and remove the template.

5 ) Carefully drill four  1/8” holes at  the locations

marked above. Place the screws selected through
the  VE1040 and then through the spacers(if
required from the bottom-up).

6)  Position the VE1040 and screw it in place using

the selected screws. Do not overtighten.

7)  Connect your TV antenna or cable system to the

antenna connector on the rear of the VE1040.

8)  Plug the AC wire into connector on the rear of

the VE1040 and then into the wall.

9)  If using the  speaker phone  feature, plug the

VE1040 into a phone jack.

10) Attch the FM Dipole Antenna to the FM Antenna

screws.

11) Route  the wires  safely  away  from  heat  and

moisture sources and secure them in place using
the self adhesive wire mounting clip provided.

FRONT VIEW

SIDE VIEW