Avaya MC3000 AP208 Manuel D’Utilisation

 

 

Configuration Note 

© Copyright 2007 Avaya Inc. All rights reserved  
PN: Meru AP Configuration Note for 3631 phone.doc 

 

Page 1

 

 
 

 
 

Manufacturer:                               Meru Networks: www.merunetworks.com 

WLAN Controllers 

Access Points 

Product(s): 

MC3000 AP208 

RF technology:                              Spread-spectrum direct sequence (DS) 
Radio:                                             2.4 – 2.484 GHz 
Antenna Diversity:                         Rx Diversity 
Security:                                         WEP, WPA-PSK, WPA2-PSK, WPA-802.1X, WPA2-802.1X 
AP software version:                      3.2 SR1 
Recommended network topology: Switched Ethernet (required) 
 

Avaya 3631 Wireless telephones can be deployed in a Meru Networks WLAN system where the 
access points are deployed within a subnet or across multiple layer 2 subnets. 
 
When deploying the system, you should determine which types of devices will require access 
and the mechanism of authentication/encryption that they support.  This will drive the 
configuration of the system to support different user groups and security methods. 

For a typical deployment, we recommend configuring at least one ESSID for the 3631 wireless 
telephones on a voice VLAN. 
 
For PC’s, configure additional ESSIDs.  This traffic should be separated onto a secure VLAN. 

Meru Virtual Cell technology allows for zero-handoff as the wireless IP telephones roam through 
the wireless environment.  This dramatically improves the quality and consistency of client roam 
times. 

Ensure that Basic controller configuration is complete including RADIUS authentication setup, if 
appropriate. 

Meru Networks supports the following 802.11 security mechanisms for wireless IP telephones: 
•  Clear (Open)