VTech IS6100 Manuel D’Utilisation

34

You can connect a PTT call from a single handset to all available  

system handsets.

You have four ways to begin a PTT-to-all call:

Press and hold 

PUSh TO TALK when the handset is not in use.

If you have more than two handsets, press 

PUSh TO TALK when the 

handset is not in use. Then press 

.

If you have more than two handsets, press 

PUSh TO TALK when   

the handset is not in use. Press 

 or 

 to highlight    

>All handsets, then press 

/SELECT or PUSh TO TALK.

If you have more than two handsets:
a) Press 

 when the handset is not in use.

b) Press 

 or 

 to highlight >

Push to talk, then press  

    

/SELECT.

c) Press 

 or 

to highlight >

All handsets, then press  

    

/SELECT or PUSh TO TALK.

Your handset displays 

Connecting to All handsets... for a few seconds. 

When the connection is made, all handsets display 

to talk and beep once.
Press and hold 

PUSh TO TALK on your handset. A chirp indicates your 

microphone is on. Speak towards the handset. Your voice is broadcast to 

all destination handsets.
While you are speaking, your handset displays 

PTT To hANDSET X (X 

represents the destination handset numbers; a maximum of four handset 

numbers appear).
Release 

PUSh TO TALK after speaking. All handsets beep once again. 

After the handsets beep, you can press and hold 

PUSh TO TALK to 

continue speaking or the destination handsets can respond (see 

PTT on page 35).
To end the PTT call, press 

 or place the handset in the 

telephone base or charger. The handset displays 

Push to talk Ended  

for a few seconds.

1.

•
•

•

•

2.

3.

4.

After 

PUSh TO TALK is released, the PTT call remains open for a short  

time. If no one presses 

PUSh TO TALK within 10 seconds, the PTT call  

ends automatically.