VTech IS6100 Manuel D’Utilisation

3

Your telephone base is ready for tabletop use. If you want to mount your 

telephone on a wall, use the provided wall mount bracket to connect with a 

standard dual-stud telephone wall mounting plate. If you do not have this 

mounting plate, you can purchase one from many hardware or consumer 

electronics retailers. You may need a professional to install the mounting plate.

Plug one end of the telephone line cord into the

 TEL LINE jack at the  

bottom of the telephone base. Plug the small end of the power adapter into 

the 

POWER jack at the bottom of the telephone base.

Position the telephone base as shown below. Insert the extended tabs 

marked 

B of the wall mount bracket into the slots marked B on the back of 

the telephone base. Push the telephone base down until it clicks securely in 

place.
Route the telephone line cord through the wall mount bracket hole and plug 

it into the telephone wall jack. Route the power cord out of the bottom of the 

telephone and plug it into an electrical outlet not controlled by a wall switch.
Align the holes on the bracket with the standard wall plate and slide the 

bracket down until it locks securely. Bundle the telephone line cord and 

power adapter cord neatly with twist ties.

1.

2.

3.

4.

2

4

3

1