3com WX2200 3CRWX220095A Manuel D’Utilisation
set service-profile attr
431
Usage — U-APSD is supported only for QoS mode WMM. If WMM is not
enabled on the radio profile, use the set radio-profile qos-mode
command to enable it.
enabled on the radio profile, use the set radio-profile qos-mode
command to enable it.
Examples — The following command enables U-APSD on radio profile
rp1:
rp1:
WX2200# set radio-profile rp1 wmm-powersave enable
success: change accepted.
See Also
set service-profile
attr
attr
Configures authorization attributes that are applied by default to users
accessing the SSID managed by the service profile. These SSID default
attributes are applied in addition to any supplied by the RADIUS server or
from the local database.
accessing the SSID managed by the service profile. These SSID default
attributes are applied in addition to any supplied by the RADIUS server or
from the local database.
Syntax —
set service-profile name attr attribute-name value
name
— Service profile name.
attribute-name value
— Name and value of an attribute you are
using to authorize SSID users for a particular service or session
characteristic. For a list of authorization attributes and values that you
can assign to network users, see Table 44 on page 262. All of the
attributes listed in Table 44 can be used with this command except
ssid.
characteristic. For a list of authorization attributes and values that you
can assign to network users, see Table 44 on page 262. All of the
attributes listed in Table 44 can be used with this command except
ssid.
Defaults — By default, a service profile does not have any authorization
attributes set.
attributes set.
Access — Enabled.
History —Introduced in MSS 4.1.
Usage — To change the value of a default attribute for a service profile,
use the set service-profile attr command and specify a new value.
use the set service-profile attr command and specify a new value.