3com WX4400 3CRWX440095A Manuel D’Utilisation

Clears the VLAN profile that had been applied to an MAP to use with 
local switching.

Syntax —

 clear {ap ap-number local-switching vlan-profile

„

 — Index value that identifies the MAP on the WX switch.

Defaults — None.

 — 

Enabled.

 —

Introduced in MSS Version 6.0.

 —

A VLAN profile consists of a list of VLANs and tags. When a 

VLAN 

profile is applied to a MAP, traffic for the VLANs specified in the 

VLAN profile is locally switched by the MAP instead of being tunneled 
back to a WX. When the VLAN profile is cleared from the MAP, traffic 
that had been locally switched is tunneled to a WX.

When clearing a VLAN profile causes traffic that had been locally 
switched by MAPs to be tunneled to a WX, the sessions of clients 
associated with the MAPs where the VLAN profile is applied are 
terminated, and the clients must re-associate with the MAPs.

 — 

The following command clears the VLAN profile that had 

been 

applied to MAP 7:

WX# clear ap 7 local-switching vlan-profile

success: change accepted.

„

„

„